Nikko Stirling
Nikko Stirling Optical Collimator with arbors
Nikko Stirling Optical Collimator with arbors
Tienda Almansa
Pol. Ind. III Fase - C/ Ronda Sur, 7
02640 Almansa
Albacete
Spain
* DISPONIBILIDAD Y ENVÍO
El plazo de expedición depende de la disponibilidad del producto y de la variante seleccionada en nuestra tienda física.
Si está disponible en tienda: el plazo previsto de expedición es de menos de 72 horas.
Si no está disponible en tienda: se solicitará al proveedor y el plazo podrá ser superior a 72 horas. La disponibilidad y el plazo de suministro dependen del proveedor.
Los gastos de envío pueden variar según el producto y su procedencia. El importe aplicable se indicará antes de finalizar la compra.
* Al continuar con la compra, aceptas las condiciones de disponibilidad y los plazos de entrega indicados.
This Nikko Stirling arbor collimator allows for the precise collimation and alignment of firearms from .177 caliber (4.5mm) up to 12-gauge shotguns.
The most complete collimator kit on the market.
This collimator will allow you to sight in your rifles, pistols, and revolvers in the quickest and easiest way.
You simply have to insert the arbor into the barrel of your firearm and align the reticles of the scope and the collimator.
Features of the Nikko Stirling optical collimator:
-Includes: carrying case, optical collimator, and 17 arbors.
-Calibers: from 17 HMR to 12g shotguns;
.177, .20, .22, 6mm, .25, 6.5mm, .27, 7mm, .30, .32, .338, .35, .375, .44, .45, .50, and 12-gauge shotgun.
INSTRUCTIONS FOR USE
Please follow the instructions provided by the scope and mount manufacturer to correctly mount your scope on the firearm.
We assume the process is followed correctly, therefore we do not offer a warranty regarding this.
If you are unsure, we strongly recommend that you consult a gunsmith or the manufacturer from whom you purchased the products.
Once the scope is properly mounted, you can use the optical collimator to zero your firearm.
1. Select the barrel arbor that corresponds to the caliber of your firearm. Each type of arbor is clearly marked.
2. Insert the arbor into the optical collimator via the notched side. Rotate the arbor until the notched part is facing the screw, which you must tighten by hand to secure the arbor to the optical collimator.
3. Insert the arbor into the firearm barrel, ensuring the optical part is aligned with the scope. If it does not fit easily, check that you have selected the correct arbor.
4. Look through the scope and check if you can see the grid clearly. If the grid is not clearly visible, you may need to adjust the scope focus.
5. Follow the instructions provided with the scope to adjust the image.
6. Remove the elevation and windage turret caps (if present).
7. Make the corresponding elevation and windage adjustments according to the scope's instruction manual to bring the reticle to the center of the grid.
8. Remove the barrel aligner and replace the caps if necessary.
9. The firearm's zero is pre-adjusted!
10. Depending on the ammunition, a more precise adjustment may be necessary to achieve the best possible grouping (we recommend a live-fire test).